O7A Panner - Eight Channel
|AAX||Yes, input mapped to 7.1|
|Input||8||Eight channels of mono (mapped to 7.1 for AAX)|
This O7A panner takes eight mono sound sources and places them in particular directions in a 3D O7A mix.
There are azimuth and elevation dials for each of the sources. These work the same way as the controls in the standard single channel panner. Each source also has mute and solo buttons and a gain control.
There is a control surface which can be used to visualise the current directions for the sources, indicated by coloured crosshairs. These can be changed by dragging with the mouse.
There are labels on the control surface to help you find left, right, above etc. However, if this still does not make any sense, you might want to see our page on the O7A Visualiser which lays out its viewing region in the same way.
Text can be entered into channel labels above the mute/solo buttons to help you keep track of which channel is which. these labels are shown when used with this plugin's View support.
If you are using this panner with Reaper, it is fairly easy to set up the individual mono source inputs as subtracks of the track on which the panner is set.
On the routing panel for each subtrack, set the "Parent Channels" to send to the relevant pair of inputs in this plugin and then pan hard left or right depending on whether this should be an odd or even input. Set this panner plugin as the first effect on the parent track and check the routing using the solo button for each source.
The plugin is available in the O7A Core plugin library.
When this option is available, a 'View' button appears at the top right of the plugin's user interface.
When this is pressed, the plugin is connected to the View or ViewVR application and is displayed there.
|View Support||ViewVR Support|
The current panner directions are shown using colour-coded crosses and labels, similarly to the plugin display.
Point at one and hold the left mouse button to select it. Then, drag to set its azimuth and elevation.
The current panner directions are shown using colour-coded beams, crosses and labels, similarly to the plugin display.
Point at one with a VR controller and the controller will indicate the label of the source pointed at. Then, hold the VR controller trigger to select it and move the controller to set its azimuth and elevation.
Azimuth is the horizontal angle, between -180 to +180 degrees, measured anticlockwise (left) from the front. Elevation is a vertical angle between -90 and +90 degrees, measured with positive upwards and 0 on the horizontal.
For instance, the direction for azimuth +90 and elevation +45 can be found by turning 90 degrees to the left and then looking up by 45 degrees.
It may help to experiment with the control surface to get used to this way of doing things.
Azimuth and Elevation can also be changed by dragging the relevant source on the control surface.
Each panned source has its own gain control, with a range from -60dB to +12dB.
Each panned source has its own mute and solo switch. These have the usual meanings and solo overrides mute.
Presets are available for this plugin:
- Front Stage
- O7A Beamer
- O7A Colourizer
- O7A Decoder - 5.1 Basic
- O7A Decoder - FuMa
- O7A Decoder - Mono
- O7A Decoder - O1A
- O7A Decoder - O2A
- O7A Decoder - O3A
- O7A Decoder - Stereo
- O7A Flare
- O7A Gain
- O7A Injector - FuMa
- O7A Injector - O1A
- O7A Injector - O2A
- O7A Injector - O3A
- O7A Look
- O7A Meter
- O7A Meter - Signal
- O7A Panner
- O7A Panner - Classic
- O7A Panner - Eight Channel
- O7A Panner - Hemisphere
- O7A Panner - Large
- O7A Panner - Two Channel
- O7A Rotation
- O7A Spatial Delay
- O7A Virtual Microphone
- O7A Visualiser
- O7A Visualiser - Hemisphere