O7A Decoder - Spatial Audio Dome 32
|Output||32||Feeds for 32 Spatial Audio Objects|
This plugin converts a 3D O7A mix into 32 channels of audio for use in a "Spatial Audio" mix.
When we use the term "Spatial Audio" here, we mean systems like Dolby Atmos or Apple Spatial Audio which represent the audio scene using a fixed multichannel speaker bed and mono audio object located in 3D space. Here, we use a number of these audio objects as a dome of virtual speakers which present the O7A scene.
The plugin user interface shows a visualisation of the dome as seen from above.
This dome arrangement is designed for use with 32 objects. They need to be set to specific fixed locations:
Spatial Audio Coordinates between -1 and +1
|Object||Left/Right (Sp. Audio X)||Back/Front (Sp. Audio Y)||Elevation (Sp. Audio Z)|
Spatial Audio Coordinates between -100 and +100
In the table above, azimuth is measured anticlockwise (left) from the front.
This dome arrangement has channels only on the horizontal or above, because objects may not be placed below the horizontal in many Spatial Audio systems, which have their origin in cinema.
Audio in the lower half of the O7A scene is typically not lost during decoding however. Instead, it is moved up to the horizontal, or made spatially ambiguous if panned more directly downwards.
Rendering the lower half of the scene is typically supported well in 3D audio rendering systems capable of handling Higher Order Ambisonics directly, such as Rapture3D Universal. In these cases, better imaging can generally be achieved by rendering from ambisonics directly rather than via these domes, which are intended for use with Spatial Audio systems that cannot do this.
These Spatial Audio systems may apply additional reverberation during rendering, on top of what is already present in the mix. Different systems apply this reverberation in different ways, and may or may not allow it to be configured or disabled. It is generally a good idea to monitor for each possible playback method.
It may be tempting to compensate for a directional inconsistencies in timbre or level produced by a particular renderer. This is not recommended in general, particularly where audio may be played back on different renderers, now or in the future.
Even on the same renderer, if head tracking is used, improvements made for one head orientation may make the mix worse in other head orientations.
Object Counts and Beds
Currently, Spatial Audio systems typically allow up to 128 channels of audio. However, delivery "profiles" will reduce the number of channels actually delivered to devices for final bed and object playback. For instance, the "MPEG-H 3D Audio Baseline" profile supports up to 24 audio objects to the device. If you have more objects in your mix than the delivery profile can handle, it is likely that the excess will be pre-rendered into a speaker bed (typically 7.1.2) or otherwise be merged together.
We don't particularly recommend use of speaker beds rather than objects for Spatial Audio delivery, not least because the rendering angles can be quite inconsistent. For instance, Front Left and Right are typically rendered on headphones at +/-45 degrees rather than the normal +/-30 degrees recommended on speakers.
The plugin is available in the O7A Spatial Audio plugin library.